Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Parameter reference

The complete VXN1 parameter table, grouped by panel. 165 parameters total = 2 × 69 per-layer + 27 global.

Per-layer parameters are exposed twice to the host — once for Upper, once for Lower — and described once below.

Oscillator 1

ParameterRangeDefaultUnit
Osc 1 WaveSine / Tri / Saw / PulseSawenum
Osc 1 Octave−4 to +40oct
Osc 1 Coarse−7 to +70st
Osc 1 Fine−50 to +500ct
Osc 1 Level0–10.8linear
Osc 1 PW0.05–0.950.5duty

Oscillator 2 & Cross-Mod

ParameterRangeDefaultUnit
Osc 2 WaveSine / Tri / Saw / PulseSawenum
Osc 2 Octave−4 to +4−1oct
Osc 2 Coarse−7 to +70st
Osc 2 Fine−50 to +500ct
Osc 2 Level0–10.6linear
Osc 2 PW0.05–0.950.5duty
Cross-Mod TypeOff / Sync / FM / RingOffenum
Cross-Mod Amount0–40linear

Mixer

ParameterRangeDefaultUnit
Sub Level0–10linear
Noise Level0–10linear
Noise ColourWhite / PinkWhiteenum

Filter

ParameterRangeDefaultUnit
HPF Cutoff20–1800020Hz
Cutoff16.35–160001000Hz
Resonance0–10.2linear
Drive0.1–41.0linear
Filter ModeLP / HP / BP / NotchLPenum
Filter Slope12 dB / 24 dB24 dBenum
Key Track0–10linear
TunedOff / OnOffbool

Envelope 1 (Modulation)

ParameterRangeDefaultUnit
Env 1 Attack0.001–100.005s
Env 1 Decay0.001–100.3s
Env 1 Sustain0–10linear
Env 1 Release0.001–100.3s
Env 1 ShapeLinear / ExpLinearenum

Envelope 2 (Amplitude) + VCA

ParameterRangeDefaultUnit
Env 2 Attack0.001–100.005s
Env 2 Decay0.001–100.2s
Env 2 Sustain0–10.8linear
Env 2 Release0.001–100.3s
Env 2 ShapeLinear / ExpExpenum
Amp GateOff / OnOffbool
Amp LFOOff / LFO 1 / LFO 2Offenum
Amp LFO Dep0–10linear

LFO 1 (per-voice, per-layer)

ParameterRangeDefaultUnit
LFO 1 ShapeSine / Tri / Saw+ / Saw− / Sq / S&HSineenum
LFO 1 Rate0.01–405.0Hz
LFO 1 SyncOff / OnOffbool
LFO 1 Delay0–40s
LFO 1 Fade0–40s
LFO 1 FreeOff / OnOffbool

Pitch modulation

ParameterRangeDefaultUnit
Pitch LFOOff / LFO 1 / LFO 2LFO 1enum
Pitch LFO Dep0–120.05st
Pitch LFO ModOff / OnOffbool
Pitch EnvOff / Env 1 / Env 2Offenum
Pitch Env Dep−12 to +120st
Pitch Env ModOff / OnOffbool
Pitch Wheel0–122.0st

PWM modulation

ParameterRangeDefaultUnit
PWM LFOOff / LFO 1 / LFO 2Offenum
PWM LFO Dep0–0.50linear
PWM EnvOff / Env 1 / Env 2Offenum
PWM Env Dep−0.5 to +0.50linear

Filter modulation

ParameterRangeDefaultUnit
Cutoff LFO1 Dep0–480st
Cutoff LFO2 Dep0–480st
Cutoff Env Dep−96 to +960st
Vel→Cutoff−96 to +960st

Mod Wheel routes

ParameterRangeDefaultUnit
Wheel→PWM−0.5 to +0.50linear
Wheel→Cutoff−96 to +960st
Wheel→Reso0–10linear
Wheel→X-Mod−48 to +480st

Wide cross-mod sweeps are built from the Pitch Env Mod switch plus Pitch Env Dep — there is no dedicated sweep envelope route in the parameter table.

Voice & assign

ParameterRangeDefaultUnit
AssignPoly / Unison / Solo / TwinPolyenum
LegatoOff / OnOffbool
Unison Detune0–5012ct
Glide Time0–0.50s
Layer Level0–11.0linear
Spread0–10linear

Global — Master

ParameterRangeDefaultUnit
Master Tune−12 to +120st
Master Volume0–10.7linear
Master Drift0–10linear
LimiterOff / OnOffbool
OversampleOff / 2× / 4× / 8×2×enum

Global — LFO 2

ParameterRangeDefaultUnit
LFO 2 ShapeSine / Tri / Saw+ / Saw− / Sq / S&HSineenum
LFO 2 Rate0.01–405.0Hz
LFO 2 SyncOff / OnOffbool

Global — Phaser

ParameterRangeDefaultUnit
PhaserOff / OnOffbool
Phaser Rate0.05–100.5Hz
Phaser Depth0–10.7linear
Phaser FB−0.9 to +0.90linear
Phaser Mix0–10.5linear
Phaser Stereo0–180180°

Global — Chorus

ParameterRangeDefaultUnit
ChorusOff / OnOnbool
Chorus Rate0.05–80.6Hz
Chorus Depth0–10.5linear
Chorus Mix0–10.4linear

Global — Delay

ParameterRangeDefaultUnit
DelayOff / OnOffbool
Delay Time0.01–20.35s
Delay FB0–0.950.4linear
Delay Mix0–10.25linear
Delay SyncOff / OnOffbool
Ping-PongOff / OnOnbool

Global — Reverb

ParameterRangeDefaultUnit
ReverbOff / OnOffbool
Reverb Size0–10.5linear
Reverb Decay0.2–102.5s
Reverb Damp0–10.4linear
Reverb Mix0–10.3linear

Non-parameter state

These live in plugin state (PluginState) but are not host-automatable:

  • Key Mode — Whole / Dual / Split
  • Split Point — MIDI note (default 60)
  • Layer Switcher — UI selection (Upper / Lower); persists across project reopens